![]() If you do not know, in Fusion 360 you can select multiple things at once by holding down ctrl while you click, but before extruding we also have to select the bars inside the Spotify logo. Do not worry if you have trouble finding the discontinuity in the SVG, I have shown above where it was located on mine to hopefully help you locate the gap in yours.ĭesigning the body for the key chain is just about as easy as it gets within Fusion 360 as it consists of only making a couple of extrusions.įirst, we have to go through the tedious process of selecting all the bars that make up the code itself. In Fusion 360 this can be done by pressing L on your keyboard or by clicking the icon in the tool bar at the top then clicking where you want the two endpoints of the line to be.įor mine, I had to repeat this on the bottom bar of the Spotify logo as well. All that must be done to fix this is to draw a line across the gap. Zoom in on the top bar inside the Spotify logo and you will see that it is not continuous. I do not know why Spotify has done this but regardless it is super easy to fix. To see if you have this same issue, try clicking the top bar inside the Spotify logo if just that part highlights then you can skip this step, but if almost the entire logo highlights you have the same problem as me. I do not know if this problem is specific to me or not, but I figured I should make note of it just in case. For some reason, the Spotify logo inside the SVG is not completely finished which makes extruding certain parts difficult.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |